We pride ourselves on using the latest, scientifically proven technologies so that we can obtain and maintain optimal oral health for our patients. The word “laser” is an acronym for “Light Amplification by Stimulated Emission of Radiation” and, within the world of dentistry, lasers are used for a variety of procedures and therapies. Simply put, this means that light from a particular crystalline source is stimulated electronically and by the use of mirrors to high energy levels, which can penetrate living tissue. Specific lasers with different light emitting capabilities can be used in dentistry — some on hard tissues and others for soft tissues like gum and oral mucous (skin) membranes within the mouth. Uses include diagnosing cavities, others for removing diseased gum tissues, for example. But best of all, lasers are minimally invasive and can result in less tissue removal, less bleeding, and less discomfort for patients after surgery. For example, using a laser, allows preparation of smaller cavities for fillings by vaporizing away tooth decay often without any anesthesia (numbing of the teeth) or a drill.

If you want to learn more about lasers and how they are used in dentistry, read the article “Lasers Shine A Light On Dentistry.” And if you want to schedule an appointment, contact us today.

Guidelines regarding the concentration of fluoride in water have recently been changed by the US Government's Department of Health and Human Services (HHS) and the Environmental Protection Agency (EPA). These agencies recommended a reduction of fluoride in water supplies to 0.7mg/L, modifying the original recommendations provided in 1962 by the US Public Health Service.

What is fluoride, and why add it to water supplies?
Fluoride is a chemical form of fluorine, a naturally occurring element. For decades, scientists have carried out studies on the effects of fluoride in water, and they have proved that fluoride strengthens tooth surfaces and makes them resistant to decay. A fluoride concentration of about one milligram per liter (1 mg/L), or 1 part per million (1ppm), in the water supply is associated with substantially fewer cavities. This concentration of fluoride (equivalent to a grain of salt in a gallon of water) has been found to have no negative health effects.

The Center for Disease Control (CDC) says that fluoridated water is one of the ten most effective public health measures of the 20th Century. The optimal amount of fluoride necessary to make teeth resistant to decay turns out to be between 0.7 and 1.20 milligrams per liter (mg/L). A certain amount of fluoride occurs naturally in water supplies, and communities have added fluoride to bring the amount up to the optimal recommendations.

How does fluoride you drink get into your teeth?
The fluoride you drink in your water is deposited in your bones. Bone is an active living substance that is constantly broken down and rebuilt as a normal body process. As this happens the fluoride is released into the blood, from which it can enter the saliva and act on the tooth surface.

What about fluoride from other sources?
Americans now have access to many sources of fluoride in addition to the water they drink. These include foods, beverages and toothpaste. As a result, dentists have begun to notice an increased prevalence of a condition known as Dental Fluorosis.

What is Dental Fluorosis?
Dental Fluorosis can occur when teeth, particularly in children, receive too much fluoride. This condition is a mottling or uneven staining of the tooth surface enamel. There may be small white spots or extensive brownish discolorations. The mottled enamel is still resistant to decay, but it may be unattractive in appearance.

What is the idea behind the new guidelines?
With the new guidelines, fluoride is kept at the lower end of the scale of the optimal concentration for strengthening teeth against decay. At this end, there is room to add consumption of fluoride from other sources such as foods or toothpaste. In short, it is the best of both worlds.

Contact us today to schedule an appointment to discuss your questions about fluoride. You can learn more by reading the Dear Doctor magazine articles “Fluoride & Fluoridation in Dentistry” and “New Fluoride Recommendations.”

If you think your child is too young to need root canal treatment, think again — there is no age limit for this treatment. If his/her primary (baby) teeth have been injured, or if decay has advanced deep into the roots of your child's teeth, a root canal treatment to stabilize teeth may be needed. Root canal treatment removes infection from the pulp, the living tissue that is found inside the tooth's roots. The pulp contains the tooth's nerves, so tooth pain is often an indication that decay has moved into the pulp.

When performing root canal treatment on primary teeth, we must keep in mind that the primary teeth's roots will be resorbed as part of the normal process in which the body makes room for the growing permanent teeth that will take their place.

If a child experiences tooth pain that is related to changes of temperature or pressure, or exposure to sweet or acidic foods, the infection is likely to be minor and easily repaired. But if he or she feels a constant or throbbing pain regardless of stimulation, it may indicate an extensive infection of the pulp and surrounding area.

If the infection is advanced, the baby tooth may have to be removed. But if baby teeth are lost prematurely, a malocclusion (from “mal” meaning bad and “occlusion” meaning bite) can easily result; so we make every effort to keep the baby teeth in place to guide the permanent teeth that are forming underneath them, inside the child's jaw. In such cases an endodontist (from the root “endo” meaning inside and “dont” meaning tooth) or pediatric dentist may perform root canal treatment, removing the diseased and infected pulp from within the tooth's roots and replacing it with a substance that can be absorbed when it is time for the baby tooth's roots to be resorbed naturally.

When baby teeth are injured through a fall or blow to the face (referred to as traumatic injury) they may develop discoloration varying from yellow to dark gray. This is a sign of damage to the pulp tissues inside the tooth's roots. Dark gray discoloration often indicates that the pulp tissues have died. In such cases root canal treatment is needed to remove the dead tissue. If a tooth is completely knocked out of the child's mouth, most dentists agree that it should not be replanted because of the risk of damage to the developing tooth underneath.

Root canal treatment for baby teeth is a better choice than tooth removal if at all possible. It helps a child retain full function of their teeth, jaws and tongue, preventing speech problems, and it helps guide the permanent teeth into their proper places.

Contact us today to schedule an appointment to discuss your questions about treatment for children's teeth. You can also learn more by reading the Dear Doctor magazine article “Root Canal Treatment for Children's Teeth.”

There's a lot to like about dental implants, today's state-of-the-art tooth-replacement system. We consider them the best choice for replacing missing teeth because implants are:

Healthy
You may not realize this, but when a tooth is missing, the bone underneath it begins to melt away. That's because bone needs constant stimulation to rebuild itself and stay healthy, and it receives this stimulation from teeth. It's a delicate balance that's disrupted by the loss of even one tooth. Because implants are made of biocompatible titanium, they actually fuse to the bone and prevent bone loss.

Strong
The fusion of implant to bone is an extremely solid connection. Not only does it offer a strong replacement for a missing tooth, but it can also offer support to other tooth-replacement methods such as fixed bridges or dentures. By themselves, these other methods would not preserve bone and might even hasten its loss in the case of dentures. But with implants, bone-loss is prevented — as is embarrassing and uncomfortable slippage of dentures.

Aesthetically Pleasing
When you receive your implant, it is left alone for a few months to complete the fusion process described above. Then it is topped with a crown made of a realistic tooth-like material. The result is so convincing as a tooth replacement, only you and your dentist may be able to tell it's not a natural tooth.

Long-Lasting
Dental implants have an amazing success rate — over 97%. And once they fuse to the jawbone, they should never need replacement. In fact, they will likely outlast the crowns to which they are attached, but this is not a problem. Implant crowns are precision components that detach for easy replacement, should the need arise.

Economical
Implants have a higher initial cost than other forms of tooth replacement, but when you consider how long they last, they are very economical. Consider it an investment in your health, appearance and self-confidence.

If you have any questions about dental implants, contact us today to schedule an appointment for an implant consultation.

You can read more about this topic in the Dear Doctor magazine article “The Hidden Consequences of Losing Teeth.”

What is composite resin bonding?
This term refers to a kind of tooth-colored material that is a mixture of a plastic resin and a glass filler. The glass gives the mixture, or composite, strength and translucency that is similar to a natural tooth. The composite is bonded to the tooth by slightly abrading or roughening the tooth so that the resin fills in small cuts in the tooth surface and bonds with it. The end result functions and looks like part of the original tooth.

What is bonding used for?
This technique is a good way to restore chipped or stained teeth or to change a tooth's shape or color. It can also be used to restore parts of a tooth near the gum line where the gums have receded and left the root partially exposed.

What are the advantages of bonding?
Composite resin tooth restorations have several advantages.

• They take only a single dental visit because they are done right in the dental chair rather than having to be sent to a dental lab for preparation.
• They are less expensive than many other dental restorations.
• They leave most of the original tooth intact since little tooth preparation or drilling has to be done in order to make the composite material bond to the tooth.
• They can be made in a wide range of colors and can be matched well with the teeth around them.
• Because little of the original tooth has to be removed, they are a good choice for teens, whose dental arches (upper and lower jaws) are still developing.

What are the disadvantages of bonding?
The composite resin material is not as strong as the original tooth material, so the bonded restorations may not last over a long time. If it does last, the material may also stain as it ages.

When should you choose bonding?
Composite resin bonding is a good choice for a quick and attractive tooth restoration that may be replaced later by something more permanent, such as porcelain veneers.

Contact us today to schedule an appointment to discuss your questions about bonding. You can also learn more by reading the Dear Doctor magazine article “Repairing Chipped Teeth.”